dito - the ultimate ESD tester Electrostatic discharges either from a human body to any other part or between two different objects can cause persistent disturbances or even destruction to sensitive electronics or controls. Voltages of several 1,000 volts are generated. dito is the most advanced ESD tester to simulate ESD pulses as accurately as possible according to the standards requirements. dito - The Most Versatile ESD Tester dito is designed to support complete ESD test. Its powerful battery allows to generate more than 50,000 pulses at 16.5kV. This is enough for more than a full days job. His different menues lead the user through standard tests, helps to evaluate the test points and allows to find susceptibility levels. It is unlike any other ESD generator. Its ergonomic design is recognised to be more user-friendly. There is no part of dito that hides the discharge tip while watching the display or operating dito. You see where you point the tip no matter how you direct dito to the EUT. The discharge voltage is measured and recorded. Discharge is stopped automatically when battery voltage becomes low. User is informed when dito cannot charge properly. All this helps to assure reliable and reproducible tests without any question mark and doubt. Discharge tips and discharge networks can easily be changed without dismantling dito; simply remove one and plug-on another tip or module. The discharge modules are automatically recognised and the R/C configuration is shown in the display. You just can’t use a wrong discharge network! Easy to Operate dito can be operated with one hand only (left or right hand doesn’t matter). All operation keys are well reachable with your thumb. The trigger button is operated with your point finger. The large display shows all relevant parameters. The easy-to-follow menu structure allows fast settings and change of parameters.

Test voltage AD mode 500V - 16,500V Test voltage CD mode 500V - 10,000V Resolution 100V Polarity Positive, negative Rise time with 150pF/330ohm (CD mode) 0.7ns - 1.0ns Holding time (AD mode) > 5s The special designed power concept of dito allows to generate more than 150,000 contact discharge pulses at 10kV with one fully loaded battery. Acustic signals help to guide the user through the test process. Features like discharge voltage measurement, discharge voltage threshold level to avoid too low discharges to be applied and various Test Routines make the dito an unsurpassed ESD tester.